Tips to Install Hinges

unduhan-30Pivots are regularly introduced on entryways, boxes, and kitchen cupboards to encourage development. The different sorts accessible can likewise help you decide the degree to which you need the way to open. Delightful and imaginative styles of pivots can likewise upgrade your home stylistic theme all things considered. Introducing them is not an extremely complex method and can be effortlessly done all alone.

Installing Door Hinges

Step 1
Before you start installing hinges on your door, you must decide which way your door will open, to determine their placement. Some of them work both ways as they are reversible, while some of them will have specific left or right markings on them.

Step 2
Normally hinges are installed at 5 inches from above the door frame and 10 inches from below it. You will need to mark these positions on the door frame where you will be installing them. Remove already present hinges in case you are replacing them.

Step 3
Place the hinge on its position and trace it’s outline on the door frame. Use a pencil or an erasable marker for this. Ensure that you trace the exact height and width of the hinge. As you will be attaching it to the door frame with screws, mark those places as well.

Step 4
Pick up a chisel and hammer to jab the marked outline area on the door frame. This will form a depression for you to install the hinge. Remove any wood splinters in this area to clear it for the hinge to fit in.

Step 5
Take the hinge, and with help of screws, fix it at its determined place. If it is done properly, you will notice that the hinge is level with the door frame and is fixed firmly in its position. Attach the other half in its position(following steps 2, 3 and 4), all the while referring your instruction manual, in case there are any particular directions you need to follow. Use a hinge pin to connect the two halves.

Installing Hinges on a Box

Step 1
Hold the wood box and lid in such a way that you can easily access all points in the box and lid. Keep the lid on the box in the way it would appear when the box is closed.

Step 2
Take your hinges and keep them on the box like you would want them to be installed. Their position should, ideally, be 4 inches from ends of the lid. Bear in mind, the top leaf of the hinge should be straight in line with the top of the lid. Make markings for screws with pencil through the top leaf holes on hinges.

Step 3
Keep the hinges aside and with the help of a drilling machine, drill holes at the screw markings you just made. The holes should not be bigger in diameter than the screws you are going to fit through them. Put the hinges back in position, insert screws through the holes, and tighten them with a screwdriver.

Step 4
For the bottom leaf of the hinge, make hole markings with a pencil. Remove the hinges, drill holes, fix the hinges, and tighten them with screws. You have successfully installed hinges on a box.

You should be able to perform the task, at the most, in an hour. However, if you want to install hinges which are a little more complex in structure, call for a carpenter to help you out.

Tips to Polishing Granite

Rock is a normally utilized material for kitchen ledges, flooring, and so on. In the event that the rock in your home is losing its sheen, you most likely may be left thinking about how to reestablish it. Here are a few tips that will help you.

The granite is popularly used as an architectural material. It is very commonly used in bathrooms, flooring, kitchen countertops and window frames as it adds a style element to home decor due to its elegant look.

Granite comes in many colors, shapes and sizes and you can easily find one to suit your taste. Once you install granite, it definitely enhances the look of your rooms. But, this awesome piece may become coarse and lose its shine due to friction. Granite sometimes changes color over time and heat. Rough use of granite materials whether indoors or outdoors can take away its gloss. So, what will you do? Continue to dream of a lustrous granite piece or just replace it (which can be hard on your pocket)? How about polishing it at home? Yes, you can easily perform the polishing task and achieve a brand-new-looking granite.

How to Clean and Polish Granite

Items Needed:

  • Detergent
  • Sponge/cloth
  • Granite sealant
  • Spray bottle
  • Isopropyl rubbing alcohol


  • Clear all the items placed over the granite. This will ensure that the entire granite is properly cleaned.
  • Take a mild detergent on a sponge. Use this to thoroughly clean the oily and greasy surface. Let the granite dry completely.
  • Read the instructions given on the sealant spray carefully.
  • Spray the sealant on one part at a time followed by rubbing it with a soft and dry cloth to have a shiny surface.
  • You may also need to allow the sealant to soak in (if the instructions suggest that), over the surface. Then rub off the excess product with a dry cloth after 15 minutes.
  • Now take 1/4th of isopropyl rubbing alcohol along with water and some liquid soap in a glass.
  • Spray this solution over the granite equally and use a soft cloth/sponge to wipe away the extra solution.
  • Allow the solution to set in and enjoy your glistening granite countertop or floor.

How to Polish Edges of Granite

Items Needed:

  • Sandpaper disc of 40/60 grit belt (choose finer grit sandpaper for finer texture)
  • Cloth
  • Graphite sealant
  • A good granite polish spray


  • Take a 40 or 60 grit belt or disc on the sander. With the help of this, start the process of grinding the edges of the granite to the shape of your choice.
  • If granite edges are already in good shape, you can use a 120 or 150 grit sandpaper and rub it over the edges to make them even.
  • Clean the edges using a damp rag.
  • Now, use a finer grit (a higher number) sandpaper and continue the sanding process till you see a uniform texture over the granite edges. Repeat this process using a finer grit sandpaper (around 600). Working from coarse sandpaper to fine sandpaper will ensure the finest and smoothest finish.
  • Polish the edges with the polishing compound.
  • Now, wash the granite edges and wipe properly to make it completely dry. Apply a granite sealing compound to the edges to protect it, as mentioned in the above section.

How to Cut and Polish Granite

Items Needed:

  • Sandpaper disc of 40/60 grit belt (choose finer grit sandpaper for finer texture)
  • Sawhorse
  • Pencil
  • Blue tape
  • Goggles and gloves
  • Wet saw
  • A good granite polish spray
  • Sealant


  • Use a sawhorse for placing the granite slab to be cut.
  • With a pencil, mark a line where the slab needs to be cut.
  • Stick a blue tape from inner side of the pencil mark carefully, this will help you while cutting the slab.
  • Wear protective gears like goggles and gloves before you start cutting.
  • Start cutting with a wet saw. A wet saw has a circular diamond blade which cuts through dense materials like granites and marbles. Remember to be slow, smooth and straight. Fast movements may lead to cracking of the slab.
  • Once the slab is cut, be careful while handling it as it may have very sharp edges.
  • Now, use a polishing compound and a sealing compound to polish the granite top and edges as mentioned above.

Your polished granite is now ready. A few drops of water can be used to test the success of this polishing process. If these drops bead, your job was perfect. If you have missed a few spots, just reapply the sealer compound. Regularly cleaning the granite, whenever used, will help retain its glossy finish.

Tips to Choose a Reliable Scaffolding Rental Service

With regards to selecting a platform rental administration, quality and security are of highest criteria. Continuously go for a respectable organization that has been giving this particular support of no less than 10 years.

An extremely essential and integral part of construction, the quality of scaffolding chosen must never be compromised. In order to ensure that you hire the best scaffolding service provider for your construction needs, make sure that you inquire from the local builders in your area. If possible, make inquiries about how much the scaffolding rental service cost them, and how was the quality of service provided by them. You should also carry out in-depth online research of the companies that provide scaffolding rental service in your State, and if they are available in your locality. This Buzzle guide discusses how to choose scaffolding rental service in further detail.

Opt for a Comprehensive Service Provider
Your objective must be to go in for a scaffolding rental service provider that meets your needs. A good company will not only deliver the scaffolding at the site, they will also take up the responsibility of setting up the scaffolding as per the design specifications of the client. The company may also offer to dismantle the set up once the project is complete. Additionally, make sure you ask about the sizes and types of scaffolding they offer on rent. The company must participate and contribute in the designing and engineering of various types of scaffolding, as well as the erecting and dismantling of their scaffolding as and when required.

Seek Consultation
A good scaffolding rental company will never agree to do a job without properly researching the project at hand. Also, you shouldn’t take everything that’s mentioned on their website at face value. Try to fix an in-person or online meeting with the representatives of the company, where you can discuss your project and needs in greater detail. Weigh the pros and cons of choosing the services of the company you’re considering, and assess whether you’re being given a fair deal or not.

Compare Quality of Work
Ask the company to exemplify their past work. There is no harm in requesting all the shortlisted companies to show proof of their past scaffolding work and the sites they have worked on. Make your decision, and go ahead with the best deal, only after being completely convinced with the credibility and quality of a scaffolding rental service provider.

Discuss Your Project
Get your project manager or contractor to discuss your construction or industrial project with the scaffolding rental company. Get a feedback on how they were treated and whether the rental company was able to identify any key areas in the scaffolding plan that needed special attention. A company that offers better, safer, and cost-effective alternatives to the original plan, and is able to understand the requirements of a project is definitely worth considering by a client. The scaffolding company may also upgrade the quality and safety standards of a project by providing specific types of scaffolding.

Safety Compliance
Make sure that the scaffolding rental company you hire adheres to Occupational Safety and Health Service Administration (OSHA) safety standards. Verify that the company is registered and has complied with State regulations and requirements to work as a scaffolding rental service provider. Inquire whether the workers of the company have received expected safety training and have the proper license to use their equipment.

The scaffolding rental service must also provide prompt emergency service and replacements in case of any damage during the course of the project.

Procedure to Apply Wall Putty

At the point when repainting dividers, it’s extremely vital to condition the surface for better utilization of the paint. You might most likely not want to see breaks or chips on your recently painted divider. Regardless of the possibility that you yourself aren’t going to handle the paint-work, understanding the artistic creation process would help you execute the assignment productively.

Before beginning to paint, you’ll have to get rid of all the stuff in the room by moving it to another room that’s yet to be painted. Remove every single thing, right from ceiling fans to curtains. Things like electric fixtures, trims, and window sills, which can’t be removed should be neatly covered with masking tape to avoid staining. The flooring too should be neatly covered with canvas or tarpaulin to prevent paint splatters from staining the tiles.

The next step is to prepare your walls and apply putty. A wall putty is basically a white-cement based powder ideal for concrete walls, and helps in filling up imperfections and cracks. It provides a damp-resistant and smooth layer for the effective application of paint.

How to Apply Wall Putty


  • Remove loose particles and flakes using a paint scraper or sandpaper.
  • Dig out cracks and holes with a screwdriver or any pointed object to remove all loose material from them.
  • Clean the walls with water and allow them to dry.

Preparing the Putty

  • Take the required amount of putty in a pan and add water to it in a 2:1 ratio.
  • Mix thoroughly to get a creamy, paste-like consistency.
  • Avoid formation of lumps while mixing; the putty should be smooth.
  • Prepare such that you intend to use it within the next two hours.

Filling Imperfections

  • Once the putty is ready, use a putty/paint knife or spatula to fill in all the cracks and holes.
  • Sand the surface with a 220 grit sandpaper.
  • Apply a primer coat to the wall and allow it to dry.

Steps to Apply the Putty

  • Apply the first coat of putty using the spatula in a vertical ‘bottom-to-top’ fashion.
  • Let the first coat stand for a minimum of 7-8 hours till dry.
  • Once dried, apply the second coat in horizontal strokes to even out the application lines/marks from the first coat.
  • Now that both the coats are applied, allow the putty to dry thoroughly for a period of 2-3 days depending on the weather.
  • Finally, use a sandpaper to smooth application marks if any. Finished!

    Now that the putty has been successfully applied, you can apply another coat of primer, followed by two coats of the desired color paint.