Ways on Tips to Decide Whether to Remodel or Relocate

Not content with your home and examining whether to migrate or rebuild? All things considered, it’s a decision that relies on upon enthusiastic and money related computations.

Before remodeling, check the zoning restrictions in your area. While your existing house may be complying with the standards, consider how your remodeling activities will fit in the larger scheme of things.
Many times when children grow up, the house which was comfortable earlier for a small family may seem to shrink in space. You may need to allocate separate bedrooms to children, and the house just doesn’t offer that liberty. The only option left with you is to either remodel the house or relocate. While the former is a relatively cheaper option, it may take up too much time and cause inconvenience. On the other hand, moving to a different location may be costlier and will not leave much option for customization. Remember that there is no one-size-fits-all solution to the problem of remodeling or relocating. You will have to compare both the options for different parameters, like requirement, cost, convenience, etc., to get the exact answer. For further help and insight, read the following points.

❑ Cost Comparison
Make a cost comparison. Understand if you can afford a mortgage loan or a home equity loan. Calculate the sum you will have to put into remodeling. If you find moving out will be cheaper, go ahead and do that instead of spending a huge chunk of your savings on redoing the house. Many times, remodeling proves to be cost-effective.

❑ Financing Options
Financing a remodeling project is not as easy as buying a new house. You will have to avail a homeowner or bank loan. It will allow you to take a second mortgage on the property. You may require a higher credit score for this. You may even get an increased rate of interest and shorter term of payment.

❑ Added Remodeling Expenditure
Apart from considering the cost, there are several other expenses that will also need to be factored in. You will have to store your belongings in a storage, move furniture, stay at a hotel, or get alternate living quarters and thrive on takeout meals. All this will definitely add up to your cost of renovation.

Some people like the community they live in, and enjoy the company of their neighbors. This happens mostly when people stay in the same locality for a long period of time. You tend to have a strong bond with the people in the community and the security it offers. If you do not feel like leaving your ‘comfort zone’ and moving to another place, you can opt for remodeling your house instead of relocating.

Even if you buy a new home, unless you do some kind of remodeling, it will not fit in your idea of a dream home. Hence, instead of incurring so much cost, you can customize your existing home by making the necessary changes as per your requirements.

Change is the Only Option
You may not like a few features in your current home like proximity to the main road, away from the urban area, too far from your workplace, traffic, pollution, etc. Such things often affect the quality of one’s living. So, one can think about moving to a quieter and pollution-free place. At such times, there is no point in remodeling the house as it will rarely help solve your problems.

Compare Amenities
Suppose your family has just expanded and you need an extra bedroom for your baby. Owing to this, you decide to move out and go to another place. However, you will have to settle for a place that will give you an extra bedroom, but may compromise on other aspects like a patio, sun deck, space, etc. At such times, remodeling your existing space is much better than moving out.

You may be living in an area where security in the neighborhood might be a prime concern. At such times, you will have no option but to move out. No amount of security measures like a burglar alarm will make you feel safe. Moving out will be the only option. However, ensure that you study the crime rate in the area where you plan to move.

Buying a New House
Many times, while buying a new house, we only consider the purchasing amount to be the expense. We conveniently forget the sales commission, real estate fees, appraisal expenses, taxes, legal costs, interest on loan, rent for storage, moving costs, expense on interior decoration, insurance, etc. This can really multiply your total cost. Hence, after considering all the points if the new house is blowing up your budget, there is no point in buying a new one.

Buying a Secondhand House
If you buy a secondhand house, sometimes, it comes with an added cost. Not only does it require repairs and refurbishment, but also some serious overhauling work which will increase your total cost. If the house is by the sea, you will have to get a lot of items replaced as they usually deteriorate due to the salty air. All this will cost you a bomb; instead if you can make some changes to your existing place, it will be cost-effective.

For all the days that remodeling goes on in your house, you will have to bear the brunt of extreme inconvenience. It may take months for the remodeling to get over, which will mean that you will have a difficult time throughout that period. Especially if you have a pregnant woman, baby, or elderly people in your family, it will maximize their troubles. Hence, if moving into a new house with all the required amenities is easier, go for it.

So, you live in a house that has been a witness to history since the early 20th century and has been passed down to you through your ancestors. While you have sentimental attachment with it, you still long for more comfortable interiors. Selling the house will not be a solution. Go ahead and renovate; expand it to suit your needs, but don’t sell or remodel it completely.

Condition of the House
If it is a particularly old house, it may not be fit for a full-length remodeling effort. Sometimes, the very foundation of the house may not be in a good condition, and renovating it will not help. It is advisable that you get a professional to study the house before you take a decision.

Tax Benefits
Buying and selling a new house has certain tax benefits. You will need to consult a tax expert to know about them, along with the other favorable conditions. You may even get a tax credit if you buy the property at a certain point of time. Under some conditions, a married couple may also be allowed to exclude a certain amount of capital gains arising from the sale of the house for tax purposes. Hence, buying a new house will prove to be more beneficial.

Getting Good Contractors
It is very important that you get good contractors for your work. Get a proper estimate for everything before they resume work. Otherwise, your work will be extended for months at a stretch, and the cost will keep increasing. Unless you’re absolutely sure that you have the right contractor for the job, renovating your house can be a risky affair.

By opting for remodeling, you will definitely be able to do away with buyer’s remorse. There is an online ‘remodel or move calculator’ offered by remodelormove.com which will help you decide whether to move or redo your house. Before remodeling, ensure that you will recover your investment. If the prices are not going to rise in your neighborhood, there is no point in investing in it.

Ways to Repair a Roof during an Emergency

On the off chance that you are a mortgage holder, sooner or later of your life you will confront a material crisis and you would be in desperate need of a crisis rooftop repair. One that has experienced harm substantial downpours, solid wind like circumstances, hail storms, and so forth are naturally qualified for repairs. Knowing how to do this is vital for everybody.

A damaged roof will directly affect the people living in the house and also the stability of the entire structure. An extreme weather condition is often the prime suspect when it comes to repair a roof. It is always advisable to wait until the bad weather conditions have passed, and then start with the work. Always take care that you have enough time and also the weather conditions are favorable. Try to take advise or help from a professional roofer while fixing a roof. Given below are points that will help you repair the roof during an emergency.


  • The most important step is to control the flow of water seeping in, as it will damage the internal structure and can be the reason for further damage to the roof. So fix the water problem first.
  • Remove any small pools of water or stagnant water from the roof. The accumulated water can be a prime cause for water damage.
  • Try to figure out the exact cause of leak in your roof. Sometimes, the leak is found in another location other than the place where it’s actually indicated.
  • The appropriate materials used for emergency roof repairs include patches, duct tape, rubber sheets, sealants, and tarps. They act as a temporary solution, so that permanent repair can be undertaken at a later stage, by an experienced professional roofer.
  • If your roof requires an emergency hammer or nail work, make sure the tools are kept at a secure location, so that they don’t cause further damage.
  • If there is a leak on your roof, clean the affected area first and then apply the patch. The stagnant water and dirt on the affected area will reduce the stickiness of the patch and it will wear off.
  • Take care that no unattached part of the roof like a asphalt, or a strip of iron or wood are lying around loosely. They could be blown away by strong winds and might hurt someone.

Repairing a Patch

  • You will need some roofing materials such as plywood scraps, sheet metal, roof flashing, measuring tapes, plastic sheeting, caulks, tacks, hammers, nail and staple gun, hammers, tin snips, and caulking guns.
  • Cut out a section of sheet metal or roof flashing, which should be 6 inches larger than the hole or leaking area.
  • Shift the edge of the sheet metal under the shingles and above the leak.
  • Attach the temporary patch with a hammer in to place with a piece of scrap wood held against the edges.
  • If you think you would require a larger patch, fold the sheet of plastic in half and use a staple gun to stick the plastic on the roof over the leak. Stick a bead of silicone caulk around the edges.

Always wear a tool belt while repairing a roof patch, it makes it easier for you to get your tools. Be careful when you are climbing on your roof, especially if there is a rough weather.

Repair Roof on Your Own to Save Money and Time Tips

At the point when there is some confined harm to the rooftop, you can repair it all alone. In this article, you will locate some important rooftop repair tips.

Roof is an essential structure of the home that provides you protection from harsh weather conditions. These weather elements are ultimately responsible for untimely deterioration of the roof condition. A damage in the roof does not mean that it has to be replaced with a new one, nor should you ignore it and defer the repair work. Even a small damage on the surface of the roof has the potential of weakening the entire building structure. Moreover, if you carry out the repair work on a small area, the cost will be much lesser than any serious problems.

The main problem areas of the roof are the chimney, joining lines of two roofs, flashing, etc. Any minor or major damage in these areas leads to leakages. Other problems that cause leakages are cracks in the shingles, missing shingles, formation of blisters or cracks on the roof, installation defect in the house siding, etc.

Repairing Cracks

When the gutters of the roof are not working properly, it leads to clogging of water on the roof. The pool of water damages the surface of the roof, which results in blisters and cracks developing on it. The first step of repairing these cracks is to soak up all the water with the help of absorbent materials and cloths. Inspect the roofing carefully to identify the exact location of the damage. Remove the loosely-bound debris from the crack with the help of a knife. Do not dig too deep into the surface to prevent any further damage. As you remove the debris, you will find that water has accumulated under it. Drain out this water and let the area get dried up completely. Then, take some roof cement, apply it on the affected area, and seal it properly.

Repairing Shingles

Roofing shingles are prone to damage due to bad weather and storms. This repair work is slightly more complicated than the one above, so you have to comply with the repair tips meticulously. To mend the shingles, you require some roof repair materials, like roofing cement, aluminum flashing, and a flat pry bar. The width of the flashing should be 1 inch lesser than that of the damaged strip of the shingle, and the length should be 4 inches more than it. Take the required measurement of the shingle and cut the flashing accordingly. Then, you have to loosen up the damaged strip and the adjacent strips on both of its sides with the help of pry bar. Now, apply some roofing cement below the shingle where the flashing has to be placed. Insert the flashing under the shingle and put some more cement above it. Finally, put some pressure on the shingle so that it gets attached to the flashing properly.


Safety is of primary concern when you are repairing the roof of your house by yourself. Do not walk on the roof for the repair work, as it can not only damage the structure further, but it could also be fatal if you fall down. Therefore, it is better to reach the roof by climbing a ladder. Choose a good quality, sturdy ladder for this purpose and secure it properly to your house. You should wear non-slip shoes with rubber soles while carrying out the repair job. It is always advisable to keep a partner with you so that in case anything goes wrong, he/she can help you out. Avoid working on the roof after a snow or rain.

If there is an extensive damage to the roof of your house then it is recommended not to try the repair work on your own, as it can cause more harm to the roof if you cannot repair it properly. Hire a good professional who is capable of addressing the issue in a much better manner.

Tips to Coat Metal Roofs

unduhan-32Metal rooftop covering upgrades the toughness of the metal rooftop. This article furnishes you with some profitable data on the procedure.

Metal roofs are mainly made of either aluminum, copper and steel, which can be recycled and therefore are environment-friendly and fireproof too. However, the disadvantage of this is that it is susceptible to water and galvanic corrosion, which results in leakage. As a matter of fact, to keep your home leak proof, you need to coat the ceiling floor every 2 years and touch-up at frequent intervals, especially after storms have deposited debris or branches.

Roof coating is a fluid substance, which when applied to the tile acts as a protective membrane. As a result, it reduces the effects of the heat of the sun, rain, hail and protects from other kinds of damage.

It has adhesive properties that enable it to stick to the surface, besides, it also has the ability to retain its elasticity under all kinds of weather conditions. It also helps reduce temperatures which in turn helps lower cooling cost.

Materials needed: roof coating, patching cement, diluted chlorine bleach solution and strong detergent (if needed)

Tools: wire brush, putty knife, coarse sandpaper, stiff-bristle paint brush, paint roller, broom, garden hose.

Coating the Metal Roof
Look for all types of flaws like blisters, cracked seams, and peeling coats. Seal fasteners and seams with caulk and allow to dry.

Using sand papers or putty knife scrape off the flaking coat. Clean the drain, vents and the floor of the ceiling to ensure the substrate is free of any foreign matter.

Remove crusted or powdery rust and treat mildew patches with chlorine bleach. Follow this with power washing with a strong detergent if needed.

Once the roof is dry, repair splits and patch existent holes and reattach loose screws. Rinse and check for puddling.

Cover seams, edges of flashing, j-rails and nail heads with patching cement using a stiff bristle paint brush.

Once dry, prime the substrate with a good quality primer to increase the adhesive quality of the coating.

Using a roll-on brush or high volume spray, uniformly coat the floor of the roof. Take special care to ensure that the repaired gaps and cracks of the ceiling floor are well-covered. For best results apply a second when the previous coat is thoroughly dried.

This complete, seamless restoration process seals, prevents leaks and provides a bright white reflective surface that helps cool the entire building envelope. The best time to take up these repairs is early spring when the temperatures are not to high and the humidity is relatively lesser compared to the warm summer months.