Features of Steel Roofing Shingles

Steel material shingles are quick picking up prevalence, for their toughness and quality. Experience this article for a reasonable thought regarding this roofing material.

Choosing the right roofing material can be a tough task, as the options are numerous. The market is flooded with different types of roofing shingles and other such materials. The perfect roofing material must be best suited for the style of the house, location, local weather conditions, and your budget. It should be durable and strong.

Nowadays, metal roofing is available in different types, and are getting popular for their durability and strength. They are also fire resistant and lightweight. Metal roofing is available in a wide range of colors and styles too. Earlier, metal roofing was mainly available in ridged (corrugated) versions, but nowadays, shingles made of metal are highly popular.

Features

Nowadays, steel metal roofing shingles are available in different colors and models. You may come across steel shingles that mimic the looks of cedar shingles and slate or clay tiles. The making of a steel roofing shingle involves preparation of a core, which is often made with metals, like aluminum or tin, fiberglass, and plastics. This core is shaped in a mold, and is then coated with steel powder, either by spraying or dipping. Stone-coated steel roofing shingles are one of the most popular types. In this type of steel shingles, the steel substrate is covered with an UV resistant acrylic polymer, that is embedded with specially graded stone chips. Even the plain ones, and those with a slate or wood finish, are also equally popular.

Pros and Cons

The advantages of this roofing material is its strength and durability. Steel roofing shingles are not vulnerable to mold, insect attack, or decay. They are also not prone to splitting, cracking, and curling. They are highly fire-resistant. Above all, steel roofing shingles are environment friendly, as they can be recycled. You may also install a steel roofing over the existing asphalt shingles, so that you don’t have to worry about disposing off the old ones. Even the maintenance cost is minimal for steel shingles.

Steel roofing shingles are light weight, and make excessive noise during rains. However, if you compare the various aspects of steel shingles and asphalt shingles; the former can be very expensive and pretty difficult to install. Steel roofing shingles can be around two to three times expensive, as compared to the regular asphalt shingles. It may not be suitable for all weather conditions, especially in locations that are prone to cyclones and hailstorms. While you can try to install these roofing shingles on your own, it has been observed that many people find it difficult to work on the edges. So, it is always better to hire professionals for this purpose.

In short, steel roofing shingles are perfect, as it combines durability with strength and good looks. If you can afford this roofing material, and if it is suited for the climatic conditions in your region, then go ahead. However, it will be better to seek the opinion of an expert, before taking a decision.

Guide to Shingle a Hip Roof

Shingles on a hip rooftop can add a touch of style to any house. An appropriate research, with respect to the style, shading and cost, will end up being helpful on the off chance that you are wanting to introduce shingles for your home…

There are many ways to make the exteriors of a house look attractive and stylish. Be it in the form of wall paints, or adding extra fittings to the roof and the wall, anything to improve the appearance of a house is welcomed. One such excellent idea is to install shingles on the roof. And if you have a hip roof, the end result of this installation is surely going to take your breath away with its sheer attractiveness. What’s more, you can also choose from a wide range of colors for roofing shingles to match or contrast the exterior wall colors and make your house a style statement in the entire neighborhood. A hip roof is actually a type of roof, whose ends meet and form a triangular shape on the top. This kind of roof is also known as the gable roof and can be seen almost everywhere. The hip roof, installed with shingles gives an elegant look to any house.

Instructions Installing Shingles on a Hip Roof

Installing shingles on a hip roof can be a bit tough if you have no prior knowledge of shingles and roofing. In this case you can seek professional help, who may do this task for a fee. However, if you have slight knowledge regarding this installation, then you can try your hand at it. With a bit of research, you can accomplish this task successfully and lay a beautiful hip roof with shingles.

  • Before getting to the task of installing roof shingles, you have to take appropriate measurements of the roof so that you purchase only the required number of shingles. The shingles can be purchased from any hardware or home improvement store. To lay them on the roof, begin from the back, while moving forward. This action will help you determine the amount of shingles visible on the main region.
  • Once you are done with the measurements and markings, you can get to the next step of laying the shingles. You can also install additional flashings on the tin strips and ridges on the roof edges to provide extra support to the shingles and also protect them from water damage.
  • Before laying the shingles apply a layer of roofing cement to hold the shingles in place and also prevent water clogging. Start from the bottom of the roof and proceed towards the top while laying the shingles on a hip roof. This method will ensure that the entire area of the roof is covered and the shingles are placed uniformly. Trim the shingle according to the angle of the roof’s ridge.
  • Use a standard cut shingle and begin at the eaves of the roof. With the help of a nail and hammer, secure the shingle on the ridge, so that it is aligned properly and gives support to the rest of the shingles to be installed. Nail the shingle in such a way that the nails are fixed on each of the upper corners. The second half of the shingle should be laid flat against the corner to extend it beyond the roof.
  • Align the rest of the shingles in the same manner till the entire edge of the roof is covered. With every laying, apply an additional layer of roofing cement. Move towards the top, till you reach the main roof. You can install regular shingles for the main roof. Cut the extra folding of the shingles with a utility knife so that they fit appropriately on the main roof. To hold the shingles on the main roof, layer them with roofing cement.

You also need to be in tune with the facts about hip roof shingles repair in case you encounter any problem regarding this attachment.

Tips To Repair a Mobile Home Roof

Tops of portable or trailer homes are presented to a wide range of climate, be it the cruel warmth of the sun or solid rain. You can complete manufactured home rooftop repair all alone with the directions given in this article.

Mobile homes are a wonderful way of experiencing different places, as it involves a combination of living and traveling. It is also economical, as it does not require much maintenance. However, its roof may need to be repaired from time to time. These repairs are expensive if a professional is hired for the purpose, but with proper instructions and tools, you can even do it yourself.

Most trailer homes come with a metal roofing, but some also have shingles. These homes are on the move most of the time, which results in openings at seams near fixtures. This can lead to damage to the roof, if it is not taken care of in time.

Signs that your roof needs repair start appearing at the most unexpected places and times. Water starts leaking around the pipes, ugly stains appear on the ceilings due to leakage, the silver coating in the roof starts thinning, and holes start appearing in the vents. All these are definite signs that the roof needs mending. At the start, you should confirm the extent of repair work that needs to be done. Make an estimate of the cost of repairing the roof by checking the roofing material.

Tools Required

  • Ladder, for climbing up the roof
  • Glass fiber or melted plastic, to seal the leaks
  • Broom, to clean the surface of the roof
  • Patching cement, for sealing the leaks
  • Cement sealer, for laying a base for the sealing material
  • Paint brushes and rollers, to apply the cement and the sealers
  • Paint tray, to keep the paintbrush
  • Elastomeric roof coating, for overall protection of the roof
  • Paint, to repair the surface of the roof.

Instructions

  • Use a ladder to climb up to the roof, and make sure that the roof is strong enough to bear your weight. If it is
  • not, you may need to use wooden beams as an additional support.
  • Use a broom to clean the surface for any dirt or old paintwork.
  • Start of the coating according to the type of the roof.
  • Use the roof coating to fill up small leaks which appear through the rust.
  • Apply the patching cement on the surface to fill in the small leaks.
  • Apply the cement sealer liberally. Apply around two coats.
  • Let the sealer dry for around 12 hours before applying the roof coating.
  • Use a paintbrush or a paint roller to apply the roof coating. Coating the whole surface will make the roof last longer.
  • For bigger leaks, use glass fiber or melted plastic to overlap the surface, and apply silicone caulking over it.
  • Finally, paint the whole roof to cover the patching.

Some Useful Tips

  • Avoid working when the sunlight is strong, as you would not be able to do much due to the strong heat.
  • Take the help of another person, as it might not be possible to do everything alone.
  • While using metal sheets, be careful while cutting the metal.
  • Dispose off the leftover sealer in the way instructed, as it may cause unwarranted harm.

Using all the help available, the job of amending the trailer home roof may not be as difficult as you imagine it to be. So now, you can enjoy the comforts of your mobile home without having to worry about leakage during a storm or the sun’s heat seeping in.