Corrugated Plastic Roofing

ous materials are utilized for making creased material, and they incorporate steel, fiberglass, plastic, and so forth. Creased plastic material has the commonplace edges and sections design, and is made of polycarbonate plastic.


This type of roofing comes in different colors that range from clear and translucent, to green and blue. The ridges and grooves pattern makes them strong, and allows water run off. While the wavy pattern is known as round profile corrugated plastic roofing sheets, even box profile types with box-type ridges are available in the market. Usually, these roofing panels are used for covering patios, carports, and greenhouses. Clear sheets are used for covering greenhouses, as this material admits enough light into the structure, and maintains the temperature and humidity levels. Sometimes, these roofing panels are also used as siding. Some types are reinforced with fiberglass threads.

This roofing material is lightweight and is easy to install. As compared to some other types, like the corrugated fiberglass roofing, these plastic panels are inexpensive. However, they can be weaker than other types, like the corrugated sheet metal roofing. So, avoid walking over these plastic panels. Even accumulation of snow and other debris must be removed regularly. However, they are resistant to corrosion and weather damages. They can also be painted afresh, if the color fades off. Before installation, you have to make sure that the roof is having a pitch of at least one inch per foot, so that the water will drain properly. Otherwise you have to opt for some additional waterproofing measures.

Installation Tips

Cutting: If you want to cut corrugated plastic roofing, use a fine-toothed hand-held power saw or a table saw. Measure and mark the sheet, as per the required dimensions. Use table clamps to attach the edges of the roofing panel to the surface of a table, so that the part of the panel you want to cut hangs off the table. Put on the safety goggles and gloves, before cutting the roofing panel through the markings. It will be always better to use the blade with the smallest tooth, for this purpose.

Fastening: You have to use round molding strips on vertical rafters and corrugated molding strips on cross braces. Use a nail gun and attach the molding strips to the rafters and cross braces, using aluminum nails. In order to nail the roofing panel to the wall, you have to drill holes, beforehand. It is often recommended to drill holes on every fourth corrugation, that too, at the higher points. The holes must have a diameter of eight to ten millimeters. The diameter of the holes must be wider (around 2 mm) than the diameter of the fasteners, because the sheet may expand slightly, during hot weather. There are various types of fasteners with water sealants, and it is better to opt for such versions, rather than the regular ones.

Sealing: There are certain basic factors that have to be taken care of, in case of corrugated plastic roofing installation. If you go for side by side installation, make sure that the panels overlap properly. You should also caulk the seems with a silicone sealant, throughout its length, so as to prevent water from entering inside. It is always advisable to overlap the ends of the adjacent sheets, by one corrugation. If you are installing them one above another, then, it will be better to work from bottom to top.

In short, corrugated plastic roofing can be a perfect choice for greenhouses, patios, carports, and other such constructions. You must understand its pros and cons, before investing on this product. If you find it not suitable for your purpose; go for other types, like metal roofing or fiberglass roofing.

Metal Roof Installation Over Shingles

Metal rooftop establishment, particularly over shingles, is not a cake walk. Nonetheless, it definitely isn’t a genuine intense occupation either. The accompanying article will inform you how to go regarding it.

Bored of seeing those shingles covering your roof? May be it is time for a change. How about having a metal roof over those shingles? Earlier, metal roofs were a part of houses which were designed only by architects. Recently, enough conventional houses too have them. Even if the house does not have a metal roof, and there are shingles, the roof can be built over it. Although there are a few architectural and construction-related concerns, they will be described as the article progresses. Take a look at the installation instructions:

#1 Gathering the supplies and tools is the fundamental task at hand. You will require:

  • Pine boards
  • 3-inch wood screws
  • 1¼-inch roofing nails
  • Hammer
  • Drill or screwdriver
  • 5/16-inch lap screws
  • Notching scissors
  • Closures

#2 Begin with making a slat board base on top of the shingles. You will have to lay some ¼-inch pine boards on your roof at every 2 feet. These will be attached to the roof with the help of 3-inch wood screws in each corner. The boards have to be laid from bottom to top.

#3 Around the perimeter of your roof, install a metal edging. For every 4-6 inches, nail the edging to the roof, using 1¼-inch roofing nails. The next thing to be done is to install metal roofing sheets, one by one. On a single section of the roof, lay the sheets from top to bottom. Once again you will require 1¼-inch metal wood screws for fixing the metal sheets with the wood slat board base.

#4 With a distance of two feet, place the screws on each side, in the center, just for the first metal sheet on the roofing. The next sheet will ideally overlap the first one, and this pattern will be continued every time you install a new sheet.

#5 The next thing is installation of overlapping screws, post covering of the roof with metal sheets. Fix the sheets with the help of 5/16-inch lap screws at a distance of 4 feet from each other, wherever there is an overlapping of the metal sheets. You can now install the metal trim along the edges of the roof and the top ridge. 1/4-inch metal wood screws, 2 feet apart, have to be fixed for this. For making the metal bend over the ridge, use notching scissors for notching the metal in the center. This is important when installing metal roofing over shingles.

#6 The bottoms of the metal sheets have to be closed. This portion will not be totally attached to the roof unlike other parts. ¼-inch metal wood screws, fixed at every 2 feet, can be used for fixing the bottoms to the roof.

#7 Finally, install closures by just pushing them in the openings. They will seal themselves, as they are self-adhesive on one side. These are useful in preventing water, insects, and other unwanted material from getting through the openings.

This was a basic overview of metal roof installation over shingles. When you actually do it, it might turn out to be more difficult than reading about it. However, you can always hire someone to do this for you. Remember, there will be some pros and cons of installing a metal roof over existing shingles. You can think of installing them if there are less than four layers of shingles on the roof. Otherwise, drop the idea. You can consult a concerned professional, in such a case. He shall also tell you about the installation cost and allied costs. However, if you are going to turn this into a DIY project, remember to take all the precautionary and safety measures.

Tips to Clean Roof Shingles

As the top of your home is every day presented to unforgiving natural conditions like rain, warmth, and daylight, it effortlessly gets to be stained. Staining combined with the development of form, molds, and green growth can give an unattractive appearance to the rooftop, and make your home watch exhausted. Other than destroying the look of your home, natural development can abbreviate the life of your rooftop.

Organic growth, especially algal growth can erode the limestone filler used in roof shingles. Over a period of time, the ceramic granules present on the surface can loosen and then washed off in rainwater. This in turn can reduce the heat-reflecting ability of asphalt shingles, besides shortening their lifespan and compromising their surface integrity.

Algal growth on the roof also paves the way for the growth of lichens and moss, which usually thrive in the gullets and edges of the shingles. They keep the roof damp by holding water and moisture, and cause the edges of the roof to lift up making them vulnerable to wind damage and leaks. Therefore, regular cleaning is an important part of roof care and maintenance, not only to maintain the aesthetic value of your house, but to increase the longevity of roof shingles.

Cleaning Roof Shingles

Before You Begin

Soak shrubs and all surrounding foliage close to the house with the garden hose. This will help protect your lawn and garden plants from the cleaning solution to be used on the roof shingles. Be sure to take all possible precautions to prevent any accidental fall or slip. It is better to have someone, a friend or a family member nearby, in case if you need any help. Use a sturdy ladder to climb onto the roof. To prevent slipping, be sure to wear non-slip shoes. You should also wear safety glasses and gloves during the entire cleaning session.

Things You Will Need

To clean your roof shingles, you will need a garden hose, a broom or sponge mop for scrubbing the surface, and a cleaning solution. Commercial cleaning products recommended by the manufacturer can be used for this purpose, or you can make a homemade cleaning solution by combining 1 cup chlorine bleach and ¼ cup trisodium phosphate with 4.5 liter water. You can also add a cup of detergent powder to this mixture to increase its degreasing ability.

Spray the Cleaning Solution

Spray the homemade cleaning solution on the roof shingles with the help of a sprayer, preferably with a pump sprayer. Allow the solution to stay on the roof for about 15 to 20 minutes. Work from the bottom of the roof, if you are standing on the roof while cleaning it. Stand at the peak of the roof and work in sections beginning with the lowest portion and then gradually working your way up. This way, you can avoid standing on wet shingles, as wet roof shingles can be quite slippery. It is better to clean the roof on a cloudy day, as this will prevent the cleaning solution from drying quickly.

Scrub with a Soft Broom or Sponge Mop

To clean the dirtier areas of the roof, you can use a broom or a sponge mop. Scrub the areas that are extremely dirty with the sponge mop or the broom while the cleaning solution is still there. However, be sure to scrub the surface gently, as vigorous scrubbing may damage the granular surface of the shingles.

Rinse the Roof

Once you are done with scrubbing the dirtier part of the roof, use a garden hose to rinse the roof shingles. Be sure to rinse the entire roof properly, as chlorine bleach can damage the shingles, if it is allowed to stay on them for a long time. If you have rain gutters installed on your roof, then push the dirt and debris to the gutters with the help of the garden hose. But be sure to rinse the gutters and the downpipes properly. Otherwise, the cleaning solution may corrode them. At the end of the cleaning session, rinse the garden plants and your lawn properly.

Cleaning Wood Shingles

Wood shingles are preferred by many architects and builders for their natural look and superior performance, especially in areas that experience high winds and hails. However, wood shingles are more susceptible to rotting, splitting, and warping, compared to asphalt shingles.

Like asphalt shingles, wood shingles need regular cleaning, as the accumulated debris can retain moisture and prevent the shedding of water from the roof, paving the way for the growth of wood-rotting fungus on the shingles. Wood shingles can be cleaned with the help of a garden hose and a soft broom, as explained above.

The use of pressure washing for cleaning roof shingles, especially wood shingles is a controversial topic. Excessive and imprudent use of pressure washers can erode the surface of wood shingles. So, it is better to get the condition of the roof evaluated by a professional roof cleaner before opting for pressure or power-washing. If pressure washing is required, be sure to use the minimum force possible, and give your roof a topical treatment afterwards.

Care and Maintenance of Roof Shingles

To prevent or minimize the growth of mold, mildews, and algae on the roof, take the necessary steps to improve the circulation of air, and increase the amount of sunlight the roof receives. This can be done by removing the overhanging tree branches that shade certain areas of the roof. Make sure that tree branches do not touch or rub against the roof, by pruning them at regular intervals.

To prevent algal growth on the roof, you can place zinc or copper strips near the ridge. Whenever it rains, the rainwater will come in contact with the metal strips, take up ions from them, and produce a chemical reaction that can inhibit the growth of algae and mildews. You can also opt for shingles with algae-resistant granules to avoid this problem altogether.

While using a commercial cleaning product, always follow the instructions mentioned on the label of the product. Apart from cleaning products, certain chemicals are available, which if applied on the roof once or twice a year, can considerably reduce the growth of mold and mildews. You can opt for these products, or do simple regular cleaning to maintain the look of your roof and increase its durability.

Tips To Select The Best Roofing Shingles

Various variables choose which ones are the best among a wide range of material shingles. It is as indicated by your requirements that it would be chosen. Perused more on this theme, in the article beneath.

Roofing shingles are one of the most important parts if you are looking for a sturdy and well-protected home. They not only are a necessity, but also provide a distinct look and identity to a house. Roof shingles are a covering for the roof, with separate overlapping elements. Home improvement, in many cases, may involve working on them. These are typically flat, rectangular in shape, and are laid in rows. The edges do not overlap. For resistance to water, a single layer is used. These are available in different materials: slate, asbestos-cement, wood, asphalt, fiberglass-based asphalt, and ceramic. Which amongst these is the best, is tough to say, as each is good for different situations and needs. Find the criteria for selecting the best suitable shingles, listed below.

Selecting the Best Roofing Shingle

Looks Matter
Well, if you are a sucker for looks, and want nothing else but a grand and royal look, may be you can think of cedar shingles for roofing. Although they are naturally beautiful, they lack versatility. As compared to them, composite ones have a host of styles and colors to offer. Moreover, you can choose a design to match your home exteriors.

A major aspect for deciding on the best choice, is their durability and strength. In case of durability, composite roofing shingles again earn brownie points. They are durable and dent-resistant, though they can loosen in bad whether. Wood is also good, but with the problem of rotting and other types of damage. In areas where it snows, metal ones can prove to be the practical choice.

Shingling (a)Long
Another factor is longevity. Metal, fiberglass-based asphalt, composite, and wood shingles, all are pretty much long-lasting. Composite shingles last between 15-30 years. Wooden ones, if properly taken care of, can last for more than 30 years, going till 50 years. The only issue with them is that they are not resistant to fire. Those made from slate are gaining in popularity, and are quite durable, lasting around 30 years or more.

To Each his Own
The climate is not the same all over the globe. So the location and climate have to be considered while getting the roofing shingles. Further, according to experts, best ones are those which are environment-friendly. Fiberglass composition is believed to be environment-friendly. That is, because they are made from recycled material. Wood shingles provide insulation naturally, cutting down on energy usage.

Stalling, Installing?
Ease of installation is an important factor. Wood shingles may require professional help to be installed, while composite ones are comparatively easier to install.

Some Tips

  • While buying the roofing shingles, always see the warranty. Three tab and laminated shingles typically have longer guarantee periods.
  • Thinking of the climate you live in will help you make the right choice.
  • The packaging labels are a good clue to ensure that the shingles are compliant.
  • Tile shingles are a good option if you are looking out for a different type of shingle. It is especially great for stucco homes and hot climates.

Finally, a search on the Internet, or in a white pages directory, will give you an idea about good manufacturers. You can then trot over to that store, and select the best roofing shingles to suit your purpose.

Tips for Choosing a Nail Gun That You Need to Know

unduhan-31Every sort of nail firearm fills a particular need. In this way, it is an unquestionable requirement that you consider where you might want to utilize the nail weapon, for to what extent, and how regularly would you be utilizing this power instrument.

A nail gun is a powerful tool that should be used only by skilled professionals and DIYers, and while wearing proper safety gear.

Although it may seem like a good idea to own a nail gun, its utility and extent of usage must be considered before purchase. A simple hammer is more than enough for driving nails meant for hanging picture frames and paintings. On the other hand, construction and building projects will necessitate the use of a powerful nail gun that can get the job done quickly and efficiently. The biggest advantage of using this power tool is its ability to rapidly shoot several nails within seconds and embed into the most resilient construction materials such as concrete, plywood, and hardwood panels. This Buzzle nail gun buying guide discusses how to choose a nail gun and some factors to consider.

Types of Nail Guns

Stick- and Coil-shaped Nail Guns
Nail guns are found in two shapes, the first being stick-shaped and the other being coiled. A stick nail gun has a straight and long magazine that is meant for holding a strip of nails. Stick guns may come in both angled and straight setups, whereas the angled models have a thicker gauge. On the other hand, coiled nail guns are equipped with a cylindrical magazine in which the nails are rolled up.

Brad Nail Guns
A brad nail gun comprises fine 18-gauge nails. Such a nail gun is meant for being used on baseboards, cabinets, thin trims, and moldings. These guns carry nails that are ⅝-2″ long and have small heads.

Finish Nail Guns
Finish nail guns have a heavier 14-16 gauge wire and are handy for baseboards, trim work, paneling and smaller crowns, and interior molding. This type of nail gun has the capacity to hold and shoot 2½-inch long nails and leaves a bigger hole than a brad nailer.

Framing Nailers
Framing nailer guns are meant for heavy-duty framing during construction of houses and buildings. They utilize low-gauge nails that are held together to form a stick that must be slid into the magazine of the nail gun. Such magazines have the capacity to hold hundreds of 20-40 inch stick nails.

Roofing Nailers
Roofing nailers are equipped with wide-headed and shorter nails. This type of nail gun is ideal for roofing, wall sheathing, framing, and underlayment. The nails are fitted into a coil-shaped magazine. A roofing nail comes with a dual contact trigger that aids in rapid shooting and embedding of coil nails.
Factors to Consider while Buying Nail Guns

Use of Air Compressor
Pneumatic nail guns will require the use of a powerful air compressor with adequate pounds per square inch (PSI) to keep the tool running at its expected pace. Therefore, check the air requirement of the pneumatic nail gun so as to not fall short of adequate pressure while working on a project. Additionally, these power tools need optimal air volume, which is measured in cubic feet per minute (CFM). Thus, to maintain appropriate CFM, make sure you buy the right-sized air hose for the compressor and keep it clean, dry, and the flow of air unrestricted. Make sure that the nail gun has a PSI and CFM rating that is compatible with that of the air compressor you wish to buy or already own.

Cordless Nail Guns
Cordless nail guns do not require an air compressor to rely on. Instead, these nailers use flammable gas, which is drained into the gun’s combustion chamber from a 0.6-oz. fuel cartridge. These gas nailers are powered by a battery that is rechargeable and use a linear-drive motor. Once the trigger is applied, the battery causes the gas to ignite, thereby, releasing enough energy to drive the piston and release a nail. Although not as powerful as air compressor-driven nail guns, cordless nail guns are almost as powerful and quick. However, these nailers are far easier to use in tight spaces, require less start-up time, and are more portable than pneumatic nailers.

There are different trigger mechanisms available for nail guns today. Therefore, you will need to try the tool before selecting one specific mechanism. For instance, some nail guns require that the user hold down the trigger and tap the gun on the nailing surface to release the fastener. Some nailers shoot nails at the slightest press of the trigger, which may end up releasing unwanted nails on the nailing surface. The best and the safest option is to opt for a nail gun that has multiple trigger settings, which allow the user to choose whichever is more comfortable to use and meet the firing needs of a specific project.

Depth Settings
It is imperative that the nail gun you choose has adjustable depth features so that you may be able to control the depth at which the fastener reaches the nailing surface. This setting will help you avoid nail protrusion, deep pecker markings, and countersinking of fasteners.

The weight of the nail gun will determine how comfortable, stable, and easy it is for you to use. For a safer bet, opt for a nail gun with a magnesium and aluminum alloy body, as these materials aid in drastically reducing the overall weight of the tool. Secondly, these materials also contribute in preventing the machine from overheating.

Being an extremely dangerous tool, it is of utmost importance that you choose a nail gun that is comfortable for you to use. Opt for an ergonomic design that will help balance the weight of the tool and make it easier to grip. Opt for a nail gun that has a big trigger and safety lock so that you never accidentally press the trigger.

Exhaust Plates
Nail guns may release a lot of exhaust and surface dust while being used. The exhaust plate in the gun ensures that the exhaust is diverted and does not cause discomfort to the user. You may enhance this feature by choosing a nail gun with adjustable exhaust plates that can be pointed even further away from the user.

Pneumatic nail guns need to be oiled regularly to keep the tool functioning optimally. Adding a few drops of tool oil in the nail gun’s air inlet will prevent nails from jamming.

Lastly, you must buy a safety box/case to store the nail gun, so as to protect it from wear and tear and prevent accidental injuries.

Features of Steel Roofing Shingles

Steel material shingles are quick picking up prevalence, for their toughness and quality. Experience this article for a reasonable thought regarding this roofing material.

Choosing the right roofing material can be a tough task, as the options are numerous. The market is flooded with different types of roofing shingles and other such materials. The perfect roofing material must be best suited for the style of the house, location, local weather conditions, and your budget. It should be durable and strong.

Nowadays, metal roofing is available in different types, and are getting popular for their durability and strength. They are also fire resistant and lightweight. Metal roofing is available in a wide range of colors and styles too. Earlier, metal roofing was mainly available in ridged (corrugated) versions, but nowadays, shingles made of metal are highly popular.


Nowadays, steel metal roofing shingles are available in different colors and models. You may come across steel shingles that mimic the looks of cedar shingles and slate or clay tiles. The making of a steel roofing shingle involves preparation of a core, which is often made with metals, like aluminum or tin, fiberglass, and plastics. This core is shaped in a mold, and is then coated with steel powder, either by spraying or dipping. Stone-coated steel roofing shingles are one of the most popular types. In this type of steel shingles, the steel substrate is covered with an UV resistant acrylic polymer, that is embedded with specially graded stone chips. Even the plain ones, and those with a slate or wood finish, are also equally popular.

Pros and Cons

The advantages of this roofing material is its strength and durability. Steel roofing shingles are not vulnerable to mold, insect attack, or decay. They are also not prone to splitting, cracking, and curling. They are highly fire-resistant. Above all, steel roofing shingles are environment friendly, as they can be recycled. You may also install a steel roofing over the existing asphalt shingles, so that you don’t have to worry about disposing off the old ones. Even the maintenance cost is minimal for steel shingles.

Steel roofing shingles are light weight, and make excessive noise during rains. However, if you compare the various aspects of steel shingles and asphalt shingles; the former can be very expensive and pretty difficult to install. Steel roofing shingles can be around two to three times expensive, as compared to the regular asphalt shingles. It may not be suitable for all weather conditions, especially in locations that are prone to cyclones and hailstorms. While you can try to install these roofing shingles on your own, it has been observed that many people find it difficult to work on the edges. So, it is always better to hire professionals for this purpose.

In short, steel roofing shingles are perfect, as it combines durability with strength and good looks. If you can afford this roofing material, and if it is suited for the climatic conditions in your region, then go ahead. However, it will be better to seek the opinion of an expert, before taking a decision.

Guide to Shingle a Hip Roof

Shingles on a hip rooftop can add a touch of style to any house. An appropriate research, with respect to the style, shading and cost, will end up being helpful on the off chance that you are wanting to introduce shingles for your home…

There are many ways to make the exteriors of a house look attractive and stylish. Be it in the form of wall paints, or adding extra fittings to the roof and the wall, anything to improve the appearance of a house is welcomed. One such excellent idea is to install shingles on the roof. And if you have a hip roof, the end result of this installation is surely going to take your breath away with its sheer attractiveness. What’s more, you can also choose from a wide range of colors for roofing shingles to match or contrast the exterior wall colors and make your house a style statement in the entire neighborhood. A hip roof is actually a type of roof, whose ends meet and form a triangular shape on the top. This kind of roof is also known as the gable roof and can be seen almost everywhere. The hip roof, installed with shingles gives an elegant look to any house.

Instructions Installing Shingles on a Hip Roof

Installing shingles on a hip roof can be a bit tough if you have no prior knowledge of shingles and roofing. In this case you can seek professional help, who may do this task for a fee. However, if you have slight knowledge regarding this installation, then you can try your hand at it. With a bit of research, you can accomplish this task successfully and lay a beautiful hip roof with shingles.

  • Before getting to the task of installing roof shingles, you have to take appropriate measurements of the roof so that you purchase only the required number of shingles. The shingles can be purchased from any hardware or home improvement store. To lay them on the roof, begin from the back, while moving forward. This action will help you determine the amount of shingles visible on the main region.
  • Once you are done with the measurements and markings, you can get to the next step of laying the shingles. You can also install additional flashings on the tin strips and ridges on the roof edges to provide extra support to the shingles and also protect them from water damage.
  • Before laying the shingles apply a layer of roofing cement to hold the shingles in place and also prevent water clogging. Start from the bottom of the roof and proceed towards the top while laying the shingles on a hip roof. This method will ensure that the entire area of the roof is covered and the shingles are placed uniformly. Trim the shingle according to the angle of the roof’s ridge.
  • Use a standard cut shingle and begin at the eaves of the roof. With the help of a nail and hammer, secure the shingle on the ridge, so that it is aligned properly and gives support to the rest of the shingles to be installed. Nail the shingle in such a way that the nails are fixed on each of the upper corners. The second half of the shingle should be laid flat against the corner to extend it beyond the roof.
  • Align the rest of the shingles in the same manner till the entire edge of the roof is covered. With every laying, apply an additional layer of roofing cement. Move towards the top, till you reach the main roof. You can install regular shingles for the main roof. Cut the extra folding of the shingles with a utility knife so that they fit appropriately on the main roof. To hold the shingles on the main roof, layer them with roofing cement.

You also need to be in tune with the facts about hip roof shingles repair in case you encounter any problem regarding this attachment.

Tips To Repair a Mobile Home Roof

Tops of portable or trailer homes are presented to a wide range of climate, be it the cruel warmth of the sun or solid rain. You can complete manufactured home rooftop repair all alone with the directions given in this article.

Mobile homes are a wonderful way of experiencing different places, as it involves a combination of living and traveling. It is also economical, as it does not require much maintenance. However, its roof may need to be repaired from time to time. These repairs are expensive if a professional is hired for the purpose, but with proper instructions and tools, you can even do it yourself.

Most trailer homes come with a metal roofing, but some also have shingles. These homes are on the move most of the time, which results in openings at seams near fixtures. This can lead to damage to the roof, if it is not taken care of in time.

Signs that your roof needs repair start appearing at the most unexpected places and times. Water starts leaking around the pipes, ugly stains appear on the ceilings due to leakage, the silver coating in the roof starts thinning, and holes start appearing in the vents. All these are definite signs that the roof needs mending. At the start, you should confirm the extent of repair work that needs to be done. Make an estimate of the cost of repairing the roof by checking the roofing material.

Tools Required

  • Ladder, for climbing up the roof
  • Glass fiber or melted plastic, to seal the leaks
  • Broom, to clean the surface of the roof
  • Patching cement, for sealing the leaks
  • Cement sealer, for laying a base for the sealing material
  • Paint brushes and rollers, to apply the cement and the sealers
  • Paint tray, to keep the paintbrush
  • Elastomeric roof coating, for overall protection of the roof
  • Paint, to repair the surface of the roof.


  • Use a ladder to climb up to the roof, and make sure that the roof is strong enough to bear your weight. If it is
  • not, you may need to use wooden beams as an additional support.
  • Use a broom to clean the surface for any dirt or old paintwork.
  • Start of the coating according to the type of the roof.
  • Use the roof coating to fill up small leaks which appear through the rust.
  • Apply the patching cement on the surface to fill in the small leaks.
  • Apply the cement sealer liberally. Apply around two coats.
  • Let the sealer dry for around 12 hours before applying the roof coating.
  • Use a paintbrush or a paint roller to apply the roof coating. Coating the whole surface will make the roof last longer.
  • For bigger leaks, use glass fiber or melted plastic to overlap the surface, and apply silicone caulking over it.
  • Finally, paint the whole roof to cover the patching.

Some Useful Tips

  • Avoid working when the sunlight is strong, as you would not be able to do much due to the strong heat.
  • Take the help of another person, as it might not be possible to do everything alone.
  • While using metal sheets, be careful while cutting the metal.
  • Dispose off the leftover sealer in the way instructed, as it may cause unwarranted harm.

Using all the help available, the job of amending the trailer home roof may not be as difficult as you imagine it to be. So now, you can enjoy the comforts of your mobile home without having to worry about leakage during a storm or the sun’s heat seeping in.

Ways on Tips to Decide Whether to Remodel or Relocate

Not content with your home and examining whether to migrate or rebuild? All things considered, it’s a decision that relies on upon enthusiastic and money related computations.

Before remodeling, check the zoning restrictions in your area. While your existing house may be complying with the standards, consider how your remodeling activities will fit in the larger scheme of things.
Many times when children grow up, the house which was comfortable earlier for a small family may seem to shrink in space. You may need to allocate separate bedrooms to children, and the house just doesn’t offer that liberty. The only option left with you is to either remodel the house or relocate. While the former is a relatively cheaper option, it may take up too much time and cause inconvenience. On the other hand, moving to a different location may be costlier and will not leave much option for customization. Remember that there is no one-size-fits-all solution to the problem of remodeling or relocating. You will have to compare both the options for different parameters, like requirement, cost, convenience, etc., to get the exact answer. For further help and insight, read the following points.

❑ Cost Comparison
Make a cost comparison. Understand if you can afford a mortgage loan or a home equity loan. Calculate the sum you will have to put into remodeling. If you find moving out will be cheaper, go ahead and do that instead of spending a huge chunk of your savings on redoing the house. Many times, remodeling proves to be cost-effective.

❑ Financing Options
Financing a remodeling project is not as easy as buying a new house. You will have to avail a homeowner or bank loan. It will allow you to take a second mortgage on the property. You may require a higher credit score for this. You may even get an increased rate of interest and shorter term of payment.

❑ Added Remodeling Expenditure
Apart from considering the cost, there are several other expenses that will also need to be factored in. You will have to store your belongings in a storage, move furniture, stay at a hotel, or get alternate living quarters and thrive on takeout meals. All this will definitely add up to your cost of renovation.

Some people like the community they live in, and enjoy the company of their neighbors. This happens mostly when people stay in the same locality for a long period of time. You tend to have a strong bond with the people in the community and the security it offers. If you do not feel like leaving your ‘comfort zone’ and moving to another place, you can opt for remodeling your house instead of relocating.

Even if you buy a new home, unless you do some kind of remodeling, it will not fit in your idea of a dream home. Hence, instead of incurring so much cost, you can customize your existing home by making the necessary changes as per your requirements.

Change is the Only Option
You may not like a few features in your current home like proximity to the main road, away from the urban area, too far from your workplace, traffic, pollution, etc. Such things often affect the quality of one’s living. So, one can think about moving to a quieter and pollution-free place. At such times, there is no point in remodeling the house as it will rarely help solve your problems.

Compare Amenities
Suppose your family has just expanded and you need an extra bedroom for your baby. Owing to this, you decide to move out and go to another place. However, you will have to settle for a place that will give you an extra bedroom, but may compromise on other aspects like a patio, sun deck, space, etc. At such times, remodeling your existing space is much better than moving out.

You may be living in an area where security in the neighborhood might be a prime concern. At such times, you will have no option but to move out. No amount of security measures like a burglar alarm will make you feel safe. Moving out will be the only option. However, ensure that you study the crime rate in the area where you plan to move.

Buying a New House
Many times, while buying a new house, we only consider the purchasing amount to be the expense. We conveniently forget the sales commission, real estate fees, appraisal expenses, taxes, legal costs, interest on loan, rent for storage, moving costs, expense on interior decoration, insurance, etc. This can really multiply your total cost. Hence, after considering all the points if the new house is blowing up your budget, there is no point in buying a new one.

Buying a Secondhand House
If you buy a secondhand house, sometimes, it comes with an added cost. Not only does it require repairs and refurbishment, but also some serious overhauling work which will increase your total cost. If the house is by the sea, you will have to get a lot of items replaced as they usually deteriorate due to the salty air. All this will cost you a bomb; instead if you can make some changes to your existing place, it will be cost-effective.

For all the days that remodeling goes on in your house, you will have to bear the brunt of extreme inconvenience. It may take months for the remodeling to get over, which will mean that you will have a difficult time throughout that period. Especially if you have a pregnant woman, baby, or elderly people in your family, it will maximize their troubles. Hence, if moving into a new house with all the required amenities is easier, go for it.

So, you live in a house that has been a witness to history since the early 20th century and has been passed down to you through your ancestors. While you have sentimental attachment with it, you still long for more comfortable interiors. Selling the house will not be a solution. Go ahead and renovate; expand it to suit your needs, but don’t sell or remodel it completely.

Condition of the House
If it is a particularly old house, it may not be fit for a full-length remodeling effort. Sometimes, the very foundation of the house may not be in a good condition, and renovating it will not help. It is advisable that you get a professional to study the house before you take a decision.

Tax Benefits
Buying and selling a new house has certain tax benefits. You will need to consult a tax expert to know about them, along with the other favorable conditions. You may even get a tax credit if you buy the property at a certain point of time. Under some conditions, a married couple may also be allowed to exclude a certain amount of capital gains arising from the sale of the house for tax purposes. Hence, buying a new house will prove to be more beneficial.

Getting Good Contractors
It is very important that you get good contractors for your work. Get a proper estimate for everything before they resume work. Otherwise, your work will be extended for months at a stretch, and the cost will keep increasing. Unless you’re absolutely sure that you have the right contractor for the job, renovating your house can be a risky affair.

By opting for remodeling, you will definitely be able to do away with buyer’s remorse. There is an online ‘remodel or move calculator’ offered by which will help you decide whether to move or redo your house. Before remodeling, ensure that you will recover your investment. If the prices are not going to rise in your neighborhood, there is no point in investing in it.

Ways to Repair a Roof during an Emergency

On the off chance that you are a mortgage holder, sooner or later of your life you will confront a material crisis and you would be in desperate need of a crisis rooftop repair. One that has experienced harm substantial downpours, solid wind like circumstances, hail storms, and so forth are naturally qualified for repairs. Knowing how to do this is vital for everybody.

A damaged roof will directly affect the people living in the house and also the stability of the entire structure. An extreme weather condition is often the prime suspect when it comes to repair a roof. It is always advisable to wait until the bad weather conditions have passed, and then start with the work. Always take care that you have enough time and also the weather conditions are favorable. Try to take advise or help from a professional roofer while fixing a roof. Given below are points that will help you repair the roof during an emergency.


  • The most important step is to control the flow of water seeping in, as it will damage the internal structure and can be the reason for further damage to the roof. So fix the water problem first.
  • Remove any small pools of water or stagnant water from the roof. The accumulated water can be a prime cause for water damage.
  • Try to figure out the exact cause of leak in your roof. Sometimes, the leak is found in another location other than the place where it’s actually indicated.
  • The appropriate materials used for emergency roof repairs include patches, duct tape, rubber sheets, sealants, and tarps. They act as a temporary solution, so that permanent repair can be undertaken at a later stage, by an experienced professional roofer.
  • If your roof requires an emergency hammer or nail work, make sure the tools are kept at a secure location, so that they don’t cause further damage.
  • If there is a leak on your roof, clean the affected area first and then apply the patch. The stagnant water and dirt on the affected area will reduce the stickiness of the patch and it will wear off.
  • Take care that no unattached part of the roof like a asphalt, or a strip of iron or wood are lying around loosely. They could be blown away by strong winds and might hurt someone.

Repairing a Patch

  • You will need some roofing materials such as plywood scraps, sheet metal, roof flashing, measuring tapes, plastic sheeting, caulks, tacks, hammers, nail and staple gun, hammers, tin snips, and caulking guns.
  • Cut out a section of sheet metal or roof flashing, which should be 6 inches larger than the hole or leaking area.
  • Shift the edge of the sheet metal under the shingles and above the leak.
  • Attach the temporary patch with a hammer in to place with a piece of scrap wood held against the edges.
  • If you think you would require a larger patch, fold the sheet of plastic in half and use a staple gun to stick the plastic on the roof over the leak. Stick a bead of silicone caulk around the edges.

Always wear a tool belt while repairing a roof patch, it makes it easier for you to get your tools. Be careful when you are climbing on your roof, especially if there is a rough weather.