Shingles on a hip rooftop can add a touch of style to any house. An appropriate research, with respect to the style, shading and cost, will end up being helpful on the off chance that you are wanting to introduce shingles for your home…
There are many ways to make the exteriors of a house look attractive and stylish. Be it in the form of wall paints, or adding extra fittings to the roof and the wall, anything to improve the appearance of a house is welcomed. One such excellent idea is to install shingles on the roof. And if you have a hip roof, the end result of this installation is surely going to take your breath away with its sheer attractiveness. What’s more, you can also choose from a wide range of colors for roofing shingles to match or contrast the exterior wall colors and make your house a style statement in the entire neighborhood. A hip roof is actually a type of roof, whose ends meet and form a triangular shape on the top. This kind of roof is also known as the gable roof and can be seen almost everywhere. The hip roof, installed with shingles gives an elegant look to any house.
Instructions Installing Shingles on a Hip Roof
Installing shingles on a hip roof can be a bit tough if you have no prior knowledge of shingles and roofing. In this case you can seek professional help, who may do this task for a fee. However, if you have slight knowledge regarding this installation, then you can try your hand at it. With a bit of research, you can accomplish this task successfully and lay a beautiful hip roof with shingles.
- Before getting to the task of installing roof shingles, you have to take appropriate measurements of the roof so that you purchase only the required number of shingles. The shingles can be purchased from any hardware or home improvement store. To lay them on the roof, begin from the back, while moving forward. This action will help you determine the amount of shingles visible on the main region.
- Once you are done with the measurements and markings, you can get to the next step of laying the shingles. You can also install additional flashings on the tin strips and ridges on the roof edges to provide extra support to the shingles and also protect them from water damage.
- Before laying the shingles apply a layer of roofing cement to hold the shingles in place and also prevent water clogging. Start from the bottom of the roof and proceed towards the top while laying the shingles on a hip roof. This method will ensure that the entire area of the roof is covered and the shingles are placed uniformly. Trim the shingle according to the angle of the roof’s ridge.
- Use a standard cut shingle and begin at the eaves of the roof. With the help of a nail and hammer, secure the shingle on the ridge, so that it is aligned properly and gives support to the rest of the shingles to be installed. Nail the shingle in such a way that the nails are fixed on each of the upper corners. The second half of the shingle should be laid flat against the corner to extend it beyond the roof.
- Align the rest of the shingles in the same manner till the entire edge of the roof is covered. With every laying, apply an additional layer of roofing cement. Move towards the top, till you reach the main roof. You can install regular shingles for the main roof. Cut the extra folding of the shingles with a utility knife so that they fit appropriately on the main roof. To hold the shingles on the main roof, layer them with roofing cement.
You also need to be in tune with the facts about hip roof shingles repair in case you encounter any problem regarding this attachment.